Repair Steps for Split Bearing Pedestals Split bearing pedestals are very prone to wear. If the wear is severe, it affects the appearance and service life, and we cannot use them normally, as long as they are repaired in a timely manner, they can continue to be used, otherwise it is a waste. However, there are many people who are not very familiar with the repair procedures for split bearing pedestals, which makes it impossible for us to repair them. Let's take a closer look.

1. "We need to first treat the surface and clean it. Generally, the surface of split bearing blocks that have been used for a period of time is contaminated with dirt. Split bearing blocks are subject to oil or moisture. We need to first remove these dirty substances and clean up the oil stains.".

2. After finishing the surface treatment, we can mix and repair the materials, and of course, the proportion of mixing must be appropriate. After adjustment, we can evenly apply the material on the surface of the product, and apply the material to the parts of the split bearing housing that need to be repaired. However, it is important to make sure that the material is filled firmly so that it can be used for a longer time.

3. After coating the material, we need to solidify it, and if necessary, we can properly heat it.

4. The heating process will allow the material to solidify better. Of course, the repair process also requires several hours, and we need to be patient.